The Ford Barn - View Single Post

third_edition · 10-29-2019, 10:04 AM

I would like it to work, but I would like it to look correct.

I considered putting hoses on the bottom which had a "step" in them, but there is only about 2 inches from the face of the outlets on the rad to the face of the inlets on the water pumps.

The brassworks sells new outlets for 38 - 39 "trucks" but they could mean they are for "Commercial" and if the basic radiators are the same, I may go with these (I have a call into them).

10-29-2019, 10:04 AM	#3
third_edition Member Join Date: Mar 2017 Location: Ontario, Canada Posts: 54	Re: 1939 Pickup Radiator Help! I would like it to work, but I would like it to look correct. I considered putting hoses on the bottom which had a "step" in them, but there is only about 2 inches from the face of the outlets on the rad to the face of the inlets on the water pumps. The brassworks sells new outlets for 38 - 39 "trucks" but they could mean they are for "Commercial" and if the basic radiators are the same, I may go with these (I have a call into them).