The Ford Barn - View Single Post

reddog565 · 04-08-2019, 10:23 AM

Hi guys. I installed a new PCV valve. Idols a lot smoother and better. But still dealing with the bogging problem. Sow I eliminated a vacuum leak. So it's down to not getting enough fuel. I'm going to have to take that center carburetor off and take a closer look at it. I'm already running a 52 jet on the center one. And 49 on the two outboards.

04-08-2019, 10:23 AM	#32
reddog565 Senior Member Join Date: Feb 2019 Location: Pittsburgh PA. Posts: 130	Re: 3duce set up Ford 94 carburetors Hi guys. I installed a new PCV valve. Idols a lot smoother and better. But still dealing with the bogging problem. Sow I eliminated a vacuum leak. So it's down to not getting enough fuel. I'm going to have to take that center carburetor off and take a closer look at it. I'm already running a 52 jet on the center one. And 49 on the two outboards.