[Y-Blockhead]

Originally Posted by Bob C

On the lights and horn it sounds like the wires feeding them are hooked
to the generator side of the cut out instead of the battery side.

Bob

Originally Posted by Tom Wesenberg

This would happen if they ran the horn/lights wire to the INPUT side of the cutout, rather than the correct OUTPUT side.

Originally Posted by SteveB31

I suspect that the wire that feeds the lights, that should be hooked to the output side of the cutout, is instead hooked to the generator side of the cutout. That would explain why the lights and horn ONLY work when the car is running. They only work after the cutout closes.

Something easy to look at.

Great minds think alike...