Re: UnStuck Block/Full Flow
Quote:
Originally Posted by BillM
Be very careful if you leave out the tubing; the drawing for modifying the block shows a .250" plug installed in the port to the rear main. You may not have any oil to the rear main if you remove the tubing and leave in that plug. This kind of problem has been reported before when people have left off the filter on a block that has been modified for the 90% filter system.
|
This post may be one of the posts you are referring to:
https://www.fordbarn.com/forum/showt...low+oil+filter
These previous posts refer back to Reds Headers full flow oil filter system with additional tubing added to back of block:
https://www.fordbarn.com/forum/showt...low+oil+filter
https://www.fordbarn.com/forum/showt...low+oil+filter
__________________
John
"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
Last edited by JM 35 Sedan; 08-12-2018 at 07:23 AM.
|