The Ford Barn - View Single Post

V12Bill · 03-17-2019, 01:14 PM

I would try to use needle nose pliers. Insert the ends into the flutes of the tap and turn in both directions to loosen stuck tap and unscrew. Tap has to be sufficient size for pliers to fit.

03-17-2019, 01:14 PM	#10
V12Bill Senior Member Join Date: May 2010 Location: Mt. Holly,NJ Posts: 1,822	Re: Broken Tap Solution I would try to use needle nose pliers. Insert the ends into the flutes of the tap and turn in both directions to loosen stuck tap and unscrew. Tap has to be sufficient size for pliers to fit.