The Ford Barn - View Single Post

37 Cab · 04-30-2019, 11:57 AM

I replaced a headlight bulb in my 37 Cabriolet and when I took the lens off I found it had a cork seal that was never glued and had shrunk to the point of not sealing. Looking on C&Gs website I see they list a gasket that looks like the one I have which is not joined at the ends (unspecified material) and they also list a rubber one that appears to be joined at the ends. Which one is correct and are they glued on?

04-30-2019, 11:57 AM	#1
37 Cab Senior Member Join Date: Dec 2014 Location: Miami Oklahoma Posts: 535	37 headlight gaskets (David G?) I replaced a headlight bulb in my 37 Cabriolet and when I took the lens off I found it had a cork seal that was never glued and had shrunk to the point of not sealing. Looking on C&Gs website I see they list a gasket that looks like the one I have which is not joined at the ends (unspecified material) and they also list a rubber one that appears to be joined at the ends. Which one is correct and are they glued on? __________________ Tommy Last edited by 37 Cab; 04-30-2019 at 11:58 AM. Reason: added info