The Ford Barn - View Single Post

burnette · 07-29-2018, 07:38 AM

gary i installed mine with a Buddy ,we had them in and out 3 times before it looked ok. the rubbers would twist and the exterior lip had 1/4 gap on top. we greased the rubber with vaseline the last try. they go in from the Inside and i think left side first. were i had the most trouble was installing divider bar,the hole in the rubber didn,t align. ended up doing a good job i washed it and no water came in ! instruction are not very clear.

07-29-2018, 07:38 AM	#4
burnette Senior Member Join Date: Feb 2017 Location: quebec canada Posts: 148	Re: Jailbar windshield install gary i installed mine with a Buddy ,we had them in and out 3 times before it looked ok. the rubbers would twist and the exterior lip had 1/4 gap on top. we greased the rubber with vaseline the last try. they go in from the Inside and i think left side first. were i had the most trouble was installing divider bar,the hole in the rubber didn,t align. ended up doing a good job i washed it and no water came in ! instruction are not very clear.