View Single Post
Old 05-31-2019, 06:41 AM   #13
Boxhead
Senior Member
 
Join Date: Jun 2018
Location: Queensland, Australia
Posts: 161
Default Re: 1 1/2 tonne spring bushes

Hi All,

Finally getting back to working on the truck once again, been a while. So i pulled the springs out which i will have reset as per the greenbook specs.

My issue is the bushes which were shown to me above,

I believe the bushes i need are,

1. 21C-5781-A front spring
1942-47 3/4" I.D. - 1" O.D. - 1.96" long.

2. 21T-5781-A rear spring
1932-47 1" I.D.- 1 1/4" O.D. - 2 15/32" long.

But i also require the rear shackles as they are flogged out ( hole is more of an oval). i believe in the green book pages that i have say they are

BB 5777 RH
AA 5777-B LH

Is this correct? Would really appreciate any help you can offer.

I have also messaged Fred to see if he had the bushes and maybe some shackles.

If not does anyone have some new shackles they would want to sell?

Regards

Corey
Boxhead is offline   Reply With Quote