The Ford Barn - View Single Post

Badpuppy · 05-29-2019, 09:53 AM

Check voltage across the cutout at fast idle and lights on. If it's much more than 1/2 volt or so the contacts are pitted; repair or replace.

Generator may need overhaul.

05-29-2019, 09:53 AM	#5
Badpuppy Senior Member Join Date: Dec 2017 Location: Guthrie, OK Posts: 1,144	Re: Lighting dims question Check voltage across the cutout at fast idle and lights on. If it's much more than 1/2 volt or so the contacts are pitted; repair or replace. Generator may need overhaul.