The Ford Barn - View Single Post

Bored&Stroked · 09-21-2020, 07:59 AM

I've never measured it, but what I do on a 39 double-detent top is put a hard stop in the top casting (5/16 NF bolt), so when I go into second "in a hurry", the shift rod/rail hits the stop at the right position. This helps guarantee that it is not "over shifted".

09-21-2020, 07:59 AM	#3
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,062	Re: syncro hub position for second I've never measured it, but what I do on a 39 double-detent top is put a hard stop in the top casting (5/16 NF bolt), so when I go into second "in a hurry", the shift rod/rail hits the stop at the right position. This helps guarantee that it is not "over shifted".