Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Zeke3
I would add a wire to the end of the coil wire on the left side conduit and pull the coil wire out so that I could work on the conduit on the bench. Then you have a wire to pull the coil wire back through when you have replaced the spark plug wires.
|
Thanks that was my plan- I have the good wires from Michael Driscoll
I did the Right side this afternoon. Have just come in for the garage In the interest of seeing if I have fixed the miss I have not run the wires in the left conduit but just plugged them into the terminal plate and cable tired them to the outside of the conduit. Test drive tomorrow here's hoping !
If it fixes the problem then I will feed them properly through the conduit.
At a later date
Karl
Karl