The Ford Barn - View Single Post

BILL WILLIAMSON · 01-12-2016, 12:20 PM

On '30's & '31's, remember that there are 2 different lighting looms, depending on whether the car came originally with COWL lights or not.
Minerva came with the WRONG loom & it took a lot of diddling around to get all the lights working proper, without changing to the PROPER loom.
Some Mickey Mouse Electrician had even strung EXTRA wires, to "try" to fix it!!! In the beginning, The lever positions were: PARK, OFF, LOW & LOW. "they" even strung EXTRA wires from the cowl light take off wire, clean up to BOTH headlights & loomed it up nicely with PLASTIC tape---WHAT A MESS!
Bill Fixed It

01-12-2016, 12:20 PM	#7
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: How to read the Light switch diagram?? On '30's & '31's, remember that there are 2 different lighting looms, depending on whether the car came originally with COWL lights or not. Minerva came with the WRONG loom & it took a lot of diddling around to get all the lights working proper, without changing to the PROPER loom. Some Mickey Mouse Electrician had even strung EXTRA wires, to "try" to fix it!!! In the beginning, The lever positions were: PARK, OFF, LOW & LOW. "they" even strung EXTRA wires from the cowl light take off wire, clean up to BOTH headlights & loomed it up nicely with PLASTIC tape---WHAT A MESS! Bill Fixed It __________________ "THE ASSISTANT GURU OF STUFF"