The Ford Barn - View Single Post

jimTN · 02-23-2021, 04:42 PM

Most of the time when you find a cyl out that has been out for years, the pin has been drilled out. Original pins are available I believe from some of the vendors. If drilled out, you may need to tap the hole and put a setscrew in.

02-23-2021, 04:42 PM	#3
jimTN Senior Member Join Date: May 2010 Location: Powell, TN Posts: 2,509	Re: Lock it or Lose it Most of the time when you find a cyl out that has been out for years, the pin has been drilled out. Original pins are available I believe from some of the vendors. If drilled out, you may need to tap the hole and put a setscrew in.