[Ed Wendell]

Fred,
I used the white litium (sp) grease on the hinge.
If you painted the frame then chase all of the threads first.
The bedding material is flat so I folded it over the edge of the glass and then taped it in place. Then miter the bottom corners of the bedding material. I used RuGlide to help the bedding slide into the frame. With the glass in the frame bottom then miter the top corners. I would also think about buying a new set of screws.
After all is assembled then take a thin piece of metal, place it against the frame; to protect the paint and as a distance guide; and use an x-acto knife to trim the bedding material.
Ed
Ed