The Ford Barn - View Single Post

glennpm · 02-12-2017, 10:39 AM

Hi Russ,

I just did a quick measurement and I think you need to plan to get the bottom of the frame roughly 32" to 34" off the floor. As you are removing it, you will be able to tilt toward the front and get by with a little less. You could also take it out from the top, but lots more work with floor, ignition lock and pedal clearance. I did it this way once with my convertible.

02-12-2017, 10:39 AM	#2
glennpm Senior Member Join Date: Sep 2014 Location: Wiscasset, Maine Posts: 1,981	Re: Pulling a '40 coupe steering box Hi Russ, I just did a quick measurement and I think you need to plan to get the bottom of the frame roughly 32" to 34" off the floor. As you are removing it, you will be able to tilt toward the front and get by with a little less. You could also take it out from the top, but lots more work with floor, ignition lock and pedal clearance. I did it this way once with my convertible.