Quote:
Originally Posted by Lawrie
I see by my John Deere grease guide that the corn head grease is good for low speed up to 1000 rpm.
They list a SD polyurea grease that flows into all areas of the bearing when working,and thickens when resting.
Has anyone used this in the U/Joint area.
It seems a better fit as the U/J sure does more than 1000 rpm
Lawrie
|
John Deere makes (or did make, as of 4-5 years ago) two types of corn head grease. One for slow speed gearboxes like you mentioned, and another one for high speed gearboxes. So a guy maybe should have both-slow speed for the steering gear, and high speed for the U-joint cavity.