Re: How loud is too loud for gears?
High gear seems to have a clunking noise to me.!st & 2nd only seem slightly noisier than a perfect trans with spur gears.Check the rear end for oil or broken pieces when you change the oil in it.And as said,grease the U-joint well thru fitting on rear brg retainer on trans.Drop the speedo drive hsg & grease until it comes out the speedo hole.With the speedo drive off,try pushing the DS up & down with a large screw driver & see how much side play there is.If more than about.015" you will likely need a new front DS brg & sleeve & brg surface on DS could be worn.
|