The Ford Barn - View Single Post - 292 y-block distributor puzzler

scicala · 09-21-2019, 06:02 PM

I agree that loadomatics are probably all over the place as far as two working the same.

The specs I have are from Holley for their distributor, but they give the specs for the '56 Teapot carb vacuum, and are all based on distributor RPM versus engine load (manifold vacuum).

If it were my car, I would probably have an aftermarket or '57/later Ford distributor on it.

Sal

09-21-2019, 06:02 PM	#40
scicala Senior Member Join Date: Jun 2010 Location: Detroit suburb, MI Posts: 3,706	Re: 292 y-block distributor puzzler I agree that loadomatics are probably all over the place as far as two working the same. The specs I have are from Holley for their distributor, but they give the specs for the '56 Teapot carb vacuum, and are all based on distributor RPM versus engine load (manifold vacuum). If it were my car, I would probably have an aftermarket or '57/later Ford distributor on it. Sal