The Ford Barn - View Single Post

ken ct · 09-12-2012, 12:40 PM

The ID hole is the most criticle at .550 /// im assuming a 9/16 arch punch is closetest to it @ .5625 A 35/64 drill bit is .5469 which might be a little small and i assume NO punch is availlible that size.I'll have to remeasure and see if any clearance there will be with a hole that size.ken ct.

09-12-2012, 12:40 PM	#9
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: Ken CT...lead washers The ID hole is the most criticle at .550 /// im assuming a 9/16 arch punch is closetest to it @ .5625 A 35/64 drill bit is .5469 which might be a little small and i assume NO punch is availlible that size.I'll have to remeasure and see if any clearance there will be with a hole that size.ken ct.