Quote:
Originally Posted by rotorwrench
The Lincoln Mercury O/H Manual shows the tools that they used to measure the pinion depth. The OEM R&P sets had the numbers scribed on to use with the calibration chart for set up. This made it a lot easier to set them up correctly with minimal adjustmants. Unfortunately, most of this stuff and the Manzel 4020B tooling is near unobtainium now so a person has to do it the by guess or by golly method of trial and error.
|
The motive gear set we used in our 50’ F1 Dana 41 was marked for pinion depth, setting it up was easy. This Yukon is not marked thus the trial and error. I should have gone with the motive gear in the 44.
JB