View Single Post
Old 07-17-2020, 02:20 PM   #16
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,524
Default Re: Camshaft Movement

Quote:
Originally Posted by tubman View Post
Using a cam meant for a pre-8BA engine? (They thrust the opposite way.)
8BA cam gears pitch forward and early cam gears thrust towards the block. However once the oil pump drive is installed and the torque required to turn the pump comes into play even the early cam gear will thrust forward.
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
Ronnieroadster is offline   Reply With Quote