View Single Post
Old 06-15-2020, 09:11 AM   #13
FL&WVMIKE
Senior Member
 
FL&WVMIKE's Avatar
 
Join Date: May 2010
Location: Daytona Beach, Fl & Spencer, W. Va,
Posts: 4,442
Default Re: Flushing engine block

Quote:
Originally Posted by CA Victoria View Post
Ditto Mike!I’m using Gano filters just in case!
I ran a Gano Filter (screen filter for the cooling system) on the mustang back in the day, and do not recommend them. They are okay if you check and empty them constantly, but about all they did for me was clog up and restrict flow. I revved the engine really hard with it once, and it was enough of a restriction to build pressure and pop the radiator hose loose... stranding me beside the road.

I can't imagine how often you'd have to remove/clean them on an old flathead.

Good Luck
__________________
Mike Jr. here. I get on here every few months to check messages, and look through his almost 500 saved messages for information on the '29 and '34 I still have. A lot of very nice people on here. He truly enjoyed Ford Barn.
FL&WVMIKE is offline   Reply With Quote