The Ford Barn - View Single Post

cas3 · 05-17-2020, 02:50 PM

looks like it would bolt onto the 4 backing plate holes on the spindle and has a fine thread screw to press out the king pin. great idea, could be done on the car then

05-17-2020, 02:50 PM	#8
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,573	Re: King pin removal, the hard way! looks like it would bolt onto the 4 backing plate holes on the spindle and has a fine thread screw to press out the king pin. great idea, could be done on the car then