View Single Post
Old 11-03-2017, 08:28 AM   #17
dmsfrr
Senior Member
 
dmsfrr's Avatar
 
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,607
Default Re: E code Air cleaner housing

Quote:
Originally Posted by Milt/Las Vegas View Post
The type you have was only used on the 56 and early 57 t-birds,and I have never seen it reproduced. ....
Alaska Jim...
On a facebook Thunderbird page I remember an E-code owner asking for help locating replacement filter elements. Not sure what he ended up using, apparently they are almost as difficult to find as the housing. Just something else to consider....
Dennis


<edit>
Filter elements -
I found the original fb post and copied 3 (unverified) comments below from other folks.

"The Ford specs for these elements are: 5 9/16" ID, 7 1/16" OD, 2 1/8" High with part number: B7A-9601-F ... but no one seems to have anymore. An alternate might be FRAM's 42148 measuring 5 1/16" ID, 6 7/8" OD, 2.150 High. Not the exact size, but possibly close enough to work. At $7 from rockauto I'd give it a try."

http://www.autopartoo.com/oem/fram/ca130pl.html

"here's a link to the K&N filter Brian mentioned"
https://www.knfilters.com/search/product.aspx?prod=e-3320
Height 1.75 in
Inside Diameter 5.25 in
Outside Diameter 6.25 in

.

Last edited by dmsfrr; 11-03-2017 at 11:22 AM. Reason: additional info
dmsfrr is offline   Reply With Quote