View Single Post
Old 04-04-2013, 09:28 PM   #5
Floyd
Senior Member
 
Join Date: May 2010
Posts: 468
Default Re: Door Question for the 40-41 Pickup Folks

Without seeing the picture, I am going to take a stab at it. The little hole is for access to the set screw that holes the lock cylinder in place. Typically, that little set screw is frozen in place. I have spent hours with a dremel getting the wallowed out set screw removed. As to the driver side, I would say it is for right hand drive trucks.
I recommend you do not get a repo lock. You can get a real one from the good lock guys or the 40 Ford guys here on the barm.
Just my opinion
Floyd
40 pickup
Floyd is offline   Reply With Quote