View Single Post
Old 04-11-2020, 04:42 PM   #7
my4dv8
Senior Member
 
Join Date: Aug 2010
Location: New Zealand
Posts: 1,110
Default Re: B4 oil pressure takeoff

Thanks for the help. Fitted a gauge and at first i thought we had no oil. Its fairly new oil ,probably 100 miles. Pulled the fitting out of the block and yes there is oil there ,albeit slow to exit when running. Fitted the line back with no gauge , after a couple of minutes the line was full, presuming the old Rex-a-co gauge is accurate we had 2lb at idle and 4lb at speed.
The new banger we are building will have a takeoff where Derek suggests, as we are also fitting full oiling system and external filter.
my4dv8 is offline   Reply With Quote