[GOSFAST]

Flathead Parts for Sale: Customer Job #1761

(1) Block (8BA) bored/plate honed 3.312" (Moly) - Decks milled (.010")/dowel pinned - Oil filter mod (95%) - Drilled for adjustable lifters - Valve seats finished - Block has been pressure tested, crack-free!

(2) Rotating ass'y, Eagle crank, Scat rods, Ross forged pistons, 1.5 metric ring pack, King main brgs, Clevite rod brgs, Durabond cam brgs - (All new)

(3) Isky 811100 cam - Johnson adjustable lifters (OEM) - Melling aluminum timing gear (cam and cam gear dowel pinned) - (All new)

(4) 16 Bronze-lined guides w/Viton intake seals - 16 Horseshoe locks -

(5) 16 Stainless valves - 16 OEM valve springs - 16 Valve spring retainers - 16 Valve locks - (All new)

(6) Melling M-19 pump - (New)

(7) 2 Edelbrock #1116 heads (dowel pinned/cc'd) - (New)

(8) ARP main stud kit (RMS-239) - ARP head stud kit (RHS-239A) -

(9) OEM center sump pan w/dipstick modification plate - Oil screen w/pickup tube -

(10) Cast iron timing cover, 1-pc front seal w/sleeve, front pulley. -

(11) Full gasket set (Best) w/big-bore head gaskets. -

(12) Asst'd stainless bolt pkge, intake, t/cover, oil pan, etc. -

Customer stopped build at last minute due to his financial status?? Cannot break up parts, must go as "package" deal per his request. The only option I can help with is the stroker ass'y, 4.000", 4.125" or 4.250"!

Customer asking $8000.00 for all "as-is"? May be slightly negotiable??

Thanks, Gary
Phone: (631) 884-3278

P.S. Only "missing" part I believe to make complete is an intake manifold?

(Add) "Bump" for the last time