The Ford Barn - View Single Post

john in illinois · 10-26-2018, 01:16 PM

I imagine you did not do this. I tapped oil for a filter off the fitting on the side of block. This did not allow no 3 exhaust to get enough oil up through the pump shaft. You could wiggle the valve a lot when open. The loose valve also took out the hardened seat.

You might check your seat if the valve had play.

John

10-26-2018, 01:16 PM	#3
john in illinois Senior Member Join Date: May 2010 Location: Illinois Posts: 2,185	Re: Worn Valve Guide I imagine you did not do this. I tapped oil for a filter off the fitting on the side of block. This did not allow no 3 exhaust to get enough oil up through the pump shaft. You could wiggle the valve a lot when open. The loose valve also took out the hardened seat. You might check your seat if the valve had play. John Last edited by john in illinois; 10-26-2018 at 01:23 PM.