The Ford Barn - View Single Post

Graham Freeman · 07-21-2019, 05:46 PM

I have several sets of N.O.S. bearings and am trying to work out the ones to use on my rebuild.
I have N.O.S. rods and a crank that shows .003 wear on the journals that I would like to do minimal machining on.
First ones are Johnson Bronze in red/black boxes.
2 Boxes have FB-10 on them with one of the bearings having x30 on it. The others have FB-14 on the box but nothing on the bearings.
I can not read what was originally on the label area besides this numbering.
Does someone have a cataloque with what this represents and are these a good bearing to use.
Also have a set of Ford ones 48-6211 X3 can not find what this size is either, any help here?

07-21-2019, 05:46 PM	#1
Graham Freeman Senior Member Join Date: May 2010 Location: New Zealand Posts: 298	32/36 Rod Bearing sizing. I have several sets of N.O.S. bearings and am trying to work out the ones to use on my rebuild. I have N.O.S. rods and a crank that shows .003 wear on the journals that I would like to do minimal machining on. First ones are Johnson Bronze in red/black boxes. 2 Boxes have FB-10 on them with one of the bearings having x30 on it. The others have FB-14 on the box but nothing on the bearings. I can not read what was originally on the label area besides this numbering. Does someone have a cataloque with what this represents and are these a good bearing to use. Also have a set of Ford ones 48-6211 X3 can not find what this size is either, any help here?