The Ford Barn - View Single Post

Keith True · 10-02-2016, 05:49 PM

Make sure the levers on the cross shaft are vertical before you hook up any rods to the axles.Just a little off one way and the levers will be too long,and just a little off the other way and the rods won't reach.

10-02-2016, 05:49 PM	#12
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 2,989	Re: Brake rods Make sure the levers on the cross shaft are vertical before you hook up any rods to the axles.Just a little off one way and the levers will be too long,and just a little off the other way and the rods won't reach.