The Ford Barn - View Single Post

duke36 · 06-17-2017, 04:42 PM

my set up is similar to GMCPASO"s, except I use the 5.5 K&N Filter. Also have a viton tip float valve (Non Steiner) that works ok. However when the car sits for a month or so, check to see if overflow out the intake due to stuck float. I sometimes run out the gas a little bit after each run . The enthanol /alcohol gas is somewhat brutal so will try additives. It sure eats up seals and gaskets in our leaf blowers!

06-17-2017, 04:42 PM	#42
duke36 Senior Member Join Date: Jun 2015 Posts: 1,414	Re: Who's running a Marvel/Schebler carb? my set up is similar to GMCPASO"s, except I use the 5.5 K&N Filter. Also have a viton tip float valve (Non Steiner) that works ok. However when the car sits for a month or so, check to see if overflow out the intake due to stuck float. I sometimes run out the gas a little bit after each run . The enthanol /alcohol gas is somewhat brutal so will try additives. It sure eats up seals and gaskets in our leaf blowers!