The Ford Barn - View Single Post

Mart · 10-24-2019, 02:33 PM

DD, using you figures, you actually do get .055" for half a turn of the sleeve. It's because you get 28 form the right hand thread and 28 from the left also. You get a full pitch from half a turn of the sleeve.

On the drag link the actual length is not as critical as the tie rod. That does need to be bang on as it sets the toe in.

Mart.

10-24-2019, 02:33 PM	#69
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,754	Re: 36 Ford drag link orientation question DD, using you figures, you actually do get .055" for half a turn of the sleeve. It's because you get 28 form the right hand thread and 28 from the left also. You get a full pitch from half a turn of the sleeve. On the drag link the actual length is not as critical as the tie rod. That does need to be bang on as it sets the toe in. Mart.