View Single Post
Old 08-17-2019, 04:56 PM   #17
VeryTangled
Senior Member
 
VeryTangled's Avatar
 
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
Default Re: Meet “ Stainless “ - the 1936 Ford

Quote:
Originally Posted by WABOOM View Post
I wonder what happened that necessitated full polish?

Hi Everyone, I found the book today while digging through my stuff prepping for a road trip.

From page 84 of Floyd V-8, by Joe H. Floyd. “The crowning achievement of the whole restoration was the meticulously polished body. The cars were originally raw, unpolished stainless steel. They looked soft and metallic with a natural metal sheen that was neither dull nor blindingly bright. Because of the original gas welding which had worked loose from the body sections it was necessary to re-weld, which caused the dull finish to be stripped. To remove the new welding strips the car had to be polished. Today, the car is a mirror on wheels and has been driven just eighteen miles since the restoration was completed in 2010.”
__________________
-Jeff H

Have you thought about supporting the Early Ford V-8 Foundation Museum?
VeryTangled is offline   Reply With Quote