Re: Detail on how to make a repro ammeter look like an original Model A ammeter.
Quote:
Originally Posted by Tom Wesenberg
I've done the same thing with an old screwdriver to make them fit the slots on slotted nuts.
The tools I made were made from a 3" long bolt of I think 3/8" diameter. I cut the threads off then drilled the center to clear the stud, then milled off the steel on each side to leave the metal to engage the slot. I then drilled the hex head for a 1/8" x 3" long piece of brass rod to use as a handle. I'll see if I can find a picture of it.
|
https://www.fordbarn.com/forum/showp...04&postcount=3
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II
|