The Ford Barn - View Single Post

51504bat · 01-26-2018, 05:34 PM

Part numbers for what I used. Grommet - Dorman/Help 42322.
PCV valve - Standard V261 from a Buick V6. I was told that you should use a PCV valve from a similar displacement engine. Don't know how true that is or not but the Buick and the 239 Flathead were very close IIRC. The manifold I used already had a fitting that I hooked the PCV valve hose to (in addition to the fitting for the vacuum wipers) Hope this helps.

01-26-2018, 05:34 PM	#8
51504bat Senior Member Join Date: Sep 2013 Location: SoCal-Redlands Posts: 3,023	Re: Home Made PCV system Part numbers for what I used. Grommet - Dorman/Help 42322. PCV valve - Standard V261 from a Buick V6. I was told that you should use a PCV valve from a similar displacement engine. Don't know how true that is or not but the Buick and the 239 Flathead were very close IIRC. The manifold I used already had a fitting that I hooked the PCV valve hose to (in addition to the fitting for the vacuum wipers) Hope this helps. __________________ Making the simple complicated for over 30 years.