View Single Post
Old 08-01-2020, 09:00 PM   #4
qmdv
Senior Member
 
qmdv's Avatar
 
Join Date: Dec 2012
Location: Nor Cal
Posts: 850
Default Re: 1/4 inch hole in shifting tower sloppy

Quote:
Originally Posted by alanwoodieman View Post
I have seen those holes and the slots drilled/ground to fit 5/16" drill bits, I would prefer you use the drill bit as they last a long time
5/16 seems extreme. I will use an F bit
qmdv is offline   Reply With Quote