View Single Post
Old 07-28-2020, 01:47 AM   #7
Smitty
Senior Member
 
Smitty's Avatar
 
Join Date: May 2010
Location: Boston North Shore
Posts: 651
Default Re: Use of a MIG welder for other purposes?

If doing frame rivets you need a 3x or 4x rivet gun, a friend holding a buck, an acetylene torch. I have riveted cross members in my Model A with excellent success. Yes see above post Big Flats Rivet will help you out.

Can buy used rivet gun (not air hammer, they are different) on the bay.
Smitty is offline   Reply With Quote