View Single Post
Old 07-19-2020, 07:43 PM   #10
aermotor
Senior Member
 
Join Date: Mar 2015
Location: Greenville, SC
Posts: 789
Default Re: Steering / Tie Rod Conundrum

Quote:
Originally Posted by Bob C View Post
No you don't.
You need to be pretty close - considering that the turning radius on each wheel is different in a turn the toe in/toe out can not be determined other than straight ahead. Also, would someone please explain how one side can have a different toe in than the other? I say it can't be unless ground/floor friction is causing it. A solid mechanical connection (tie rod) between the spindle arms will not permit a difference in toe in from right side to left side.
John

Last edited by aermotor; 07-19-2020 at 08:01 PM.
aermotor is offline   Reply With Quote