View Single Post
Old 06-24-2020, 01:49 PM   #16
grumppyoldman
Senior Member
 
grumppyoldman's Avatar
 
Join Date: Apr 2017
Location: Texas Gulf Coast
Posts: 706
Default Re: Problems starting when hot

Check the ballast resistor under the dash, if it has one. My 41 would do the same as what you described. I cleaned all the grounds and connections on the fuse block where the resistor is locatedfd and no more hard hot starts. Do this first before buying more parts. Good luck Al
grumppyoldman is offline   Reply With Quote