View Single Post
Old 11-29-2019, 05:16 PM   #7
Blastfromthepast
Senior Member
 
Join Date: May 2017
Location: NY
Posts: 194
Default Re: Horn rod removal

You can not separate the rod from the horn button housing with out cutting the rod. I found out the hard way that the rod is rounded over the horn button housing. You can remove the horn button by removing the steering wheel. Disconnect the light harness at the bottom of the column. Then you can pull the rod up and out but might have a problem with it hitting the roof but you donít have to remove the whole rod. Remove it just enough to see the horn button bent over ears that hold it to the housing. Be careful unbending them you donít want to snap them off. If you do you will need a New button.
Blastfromthepast is offline   Reply With Quote