The Ford Barn - View Single Post

The Brassworks · 06-07-2019, 03:18 PM

Sorry so late. We do not check the forum unless someone contacts us.

Re: Neck placement.
We communicate the OE neck placement when ordering but can place the neck wherever people want it. We recently had a gentlemen point out that his fluid capacity would be greater with a top placement which is an interesting consideration.

Re: Top Tanks
We have been moving to hand fabricated tank designs to better replicate the shapes and angles rather than generic smooth drawn tanks. They look more original but take more time. If you want OE its best for us restore with your OE tanks and sides etc.

The three row core and the 4 row should fit the 39-41 radiator(s) but we discuss the size at the time of order and encourage people to measure and confirm. Of all the radiators to squeeze more core in this is the one due to airflow and design and engine etc etc

06-07-2019, 03:18 PM	#20
The Brassworks Member Join Date: Jun 2010 Location: Paso Robles, People's Republic of CA Posts: 82	Re: 41 radiator, original vs brassworks Sorry so late. We do not check the forum unless someone contacts us. Re: Neck placement. We communicate the OE neck placement when ordering but can place the neck wherever people want it. We recently had a gentlemen point out that his fluid capacity would be greater with a top placement which is an interesting consideration. Re: Top Tanks We have been moving to hand fabricated tank designs to better replicate the shapes and angles rather than generic smooth drawn tanks. They look more original but take more time. If you want OE its best for us restore with your OE tanks and sides etc. The three row core and the 4 row should fit the 39-41 radiator(s) but we discuss the size at the time of order and encourage people to measure and confirm. Of all the radiators to squeeze more core in this is the one due to airflow and design and engine etc etc Last edited by The Brassworks; 06-07-2019 at 03:31 PM.