The Ford Barn - View Single Post

100IH · 12-12-2016, 10:07 AM

Steve, I have had good luck straightening pot metal carbs on Farmall Cubs, not quite so old but subjected to much more heat than a wiper casting on an A. Worked cold using controlled force against an iron plate for support with shims, Nothing to loose if it's unusable now. Do a search on farmallcub.com. Mark Jacobson in Kuna.

12-12-2016, 10:07 AM	#9
100IH Senior Member Join Date: Dec 2011 Location: SW Idaho Posts: 970	Re: Bent OD Electric Windshield Wiper base Steve, I have had good luck straightening pot metal carbs on Farmall Cubs, not quite so old but subjected to much more heat than a wiper casting on an A. Worked cold using controlled force against an iron plate for support with shims, Nothing to loose if it's unusable now. Do a search on farmallcub.com. Mark Jacobson in Kuna.