View Single Post
Old 08-10-2019, 10:35 PM   #8
daveymc29
Senior Member
 
daveymc29's Avatar
 
Join Date: Sep 2010
Location: Danville, CA
Posts: 1,550
Default Re: Engine Blow By or Not

Perhaps some variation in misting could be attributed to the orientation of the baffles? I would guess if one is really concerned that you could mark the tube and rotate it some until you discover what orientation gives the best results. I had used a copper scrub pad to eliminate my misting, then folks seemed set against that so I took it out. Don't notice much difference, so maybe it mysteriously cured itself?
daveymc29 is offline   Reply With Quote