View Single Post
Old 08-14-2017, 05:03 AM   #10
RUNNERBUN
Senior Member
 
RUNNERBUN's Avatar
 
Join Date: Nov 2011
Location: Queensland Australia
Posts: 640
Default Re: Is this Wheel/Lug Nut Safe to use?

Using the one on the right is possible but I would use the washer. If you have a lathe or a friend with one I would suggest you can cut the relief as well. Should be a straight forward job.
__________________
Adjust your points with gentle blows of a 2 pound hammer
RUNNERBUN is offline   Reply With Quote