View Single Post
Old 07-08-2019, 10:22 AM   #12
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,516
Default Re: Dip stick use question

Quote:
Originally Posted by bigd1101 View Post
Hi Brent, I did some searching on an old Barn thread and sure enough, the stick has to be squeezed at the handle and inserted fully as you say to get the correct read. I also read that the A's are happy as you say, a quart low or a quart high, with the higher level leaking out somewhere if the car is parked on a steep incline ( too funny) so I guess the answer is....make sure there is oil in the car and change it often if there is no filter. Love the car and it's simplicity and forgiveness on certain functions......and finally after a year of chasing and correcting the overheating problem, driving the car yesterday in the country, where I live.
Don


Again, lots of info that sometimes is misleading -at best. I suppose there is always that one person that can make the argument that oil will leak if it is parked on a steep enough incline however the biggest cause of oil leaking at a steep incline would be from an improperly adjusted rear main bearing clearance.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote