View Single Post
Old 05-08-2019, 04:45 PM   #9
Senior Member
glennpm's Avatar
Join Date: Sep 2014
Location: Wiscasset, Maine
Posts: 725
Default Re: Adjusting Fuel Level in King Seeley Gauge

Hi Ted,

If I add an calibration rod, I must remove some of the red fluid. The volume of the added rod in the reservoir will take the place of an equal volume of fluid if the rod is completely submerged.

Last year I never got above the 5/8" mark when full, Same experience as JimG.

I find it hard to believe that when new the fuel gauge never worked properly.

glennpm is offline   Reply With Quote