View Single Post
Old 10-01-2022, 12:36 PM   #3
packrat6
Member
 
Join Date: Apr 2017
Location: Smithfield, Virginia
Posts: 76
Default Re: Interior light wiring

i figured out another solution for mine. you probably can't do the dome light by pulling with old wires. the ground wire on mine was run through holes drilled into the overhead bows. small hole and you probably won't be able to pull a connected wire through it. on mine, the ground wire for that light ran to the back of the car and down and grounded to a metal brace under the 1/4 window. the power runs from the front of the car and through the bows.
packrat6 is offline   Reply With Quote