View Single Post
Old 01-02-2021, 05:22 PM   #5
Bob Johnson
Senior Member
 
Bob Johnson's Avatar
 
Join Date: May 2010
Location: California
Posts: 908
Default Re: Frame - is it straight?

Here are a couple of pictures of a bent frame with a string used to show how bent the frame was. The upper picture is the driver side and there is a slight sag around the rear motor mount. The second picture is the passenger side which has a very large bend from the rear motor mount to the front of the car. The frame should be perfectly flat from the back all the way to the front where the front fender support attaches to the frame.


Bob


Bob Johnson is offline   Reply With Quote