Quote:
Originally Posted by Bored&Stroked
Sounds like you're using the late 49-53 sleeve with it . . . is it one that is smooth (for the new seal). If so, then you'd need to trim the back of the 59x pulley to account for the sleeve length. What I can't say is if they made it the correct length. If it was me, I'd get a late 49-53 pulley that used the same type of slip-on sleeve and determine the length from the front of the pulley (where the big washer hits it) - to the back where it would hit the sleeve - to determine the length you need.
|
Yep thats correct its the smooth outter one. And as stated if using it there is a need to trim back the 59A pulley to ensure combined overall length remains the same.
Phil NZ.