05-10-2020, 10:09 PM
|
#18
|
Senior Member
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,611
|
Re: 59a with Scat Set Up Your thoughts please.
Quote:
Originally Posted by GOSFAST
Hi Phil, just got a PM from "Kev" in Germany, same exact Scat crank as your's and his rod brg clearance is over .003", close to .0035".
He asked me for a "fix", seems Scat is making their rod journals 1.999" which gives you too much clearance on the rods. I recommended to him to try to locate some .001" under rod brgs, it would help!
You may be good, but I would check this item first before going any further!
Thanks, Gary in N.Y.
P.S. This is one reason we refuse to use the Scat FH cranks, there are a few others also! We strictly use the Eagle line on the FH's!
|
Gary thanks so much for your input. Will check this out also.
Phil NZ
|
|
|